Publications


  • Rubric: Press-releases
    26.05.2015
    European quality and Russian character Eurocontainers, a new product from IPlast

    Since the beginning of 2015 I-Plast company has launched the second new product: Eurocontainers’ range. (Earlier we informed you about the start of production of the SK store crates). Eurocontainers are multifunctional plastic crates which will definitely be useful in many spheres of our life; for example, in storage managing, logistics, manufacturing and industry, and, of course, agriculture.

    Made from primary propylene, Eurocontainers can be used in a wide range of temperatures, from 20 degrees below zero to 40 degrees above zero. The line starts with seven models. The main range of sizes is composed of boxes with following bases: 400300 mm, 600400 mm, 800600 mm. Each container can be fitted with a customized cover. The base, wall and handles of Eurocontainers can be produced in different variations which provide the new boxes with an additional range of functions and broaden their load characteristics. The walls of some models are perforated, and thus perfect for storing and transporting fruits, vegetables and other edible goods.

  • Rubric: Press-releases
    05.08.2013
    iPlast welcomed representatives of waste collecting businesses at the Conference "New Container New Opportunities"

    The conference was organized to present to the guests the «iPlast» 3-years development strategy and prospects of the waste containers production growth. The discussion covered some new approaches and complex solutions in the sphere of waste collection and transport.

    More than 40 visitors from different regions took part in the conference. They were taken to an excursion around «iPlast» production facilities to watch molding process of the 1100 liter waste container on Engel 5500, the biggest molding machine in the Eastern Europe. The guests were able to see the demonstration of waste loading into the European-type rear-loader. During the around-city-excursion the people could fully realize the advantages of usage of the plastic waste containers in Nizhnekamsk yards.

  • Rubric: News
    14.05.2013
    iPlast starts up the production of plastic pallet layer pads for beverage industry

    In April 2013 as part of its product expansion strategy «iPlast» has started production of reusable plastic layer pads.

    This has become possible as a result the Company’s acquisition of the polymeric sheet beading line.

  • Rubric: News
    03.07.2012
    iPlast begins mass production of 1100 l polymeric trash containers

    The new product of the company — the polymeric container for household waste — enters the Russian market. This came to be the first plastic 1100 l trash container produced by the Russian company.

    The trash container having been designed together with western manufacturers in accordance with DIN EN 840 standard is meant for collection of household and industrial waste. The item weighs 51.5kg, its interior volume makes 1100 liter, and loading capacity reaches 510 kg. The product has 4 integral handles, 4 heavy-duty wheels, and is also equipped with a special construction for gripping mechanism. The container is made of high quality virgin raw material and therefore is more reliable when used in winter conditions (operating temperatures lie between −40 and +60 degrees Celsius).

  • Rubric: News
    25.06.2012
    Shipments of rubber have been made to the key European consumers in 1080 kg containers made by iPlast

    Back in November 2011 iPlast recorded it had completed designing the container with 900 kg loading capacity, which is being shipped to consumers of synthetic rubber on a regular basis since May 2012.

    Meeting the demands of its customers, iPlast has designed a new product – a container with loading capacity of 1080 kg. The new container (including its lid) is being produced by the unique advanced technology of low pressure molding with structural foaming. The item has dimensions of 1450 x 1125 x 1100 mm and weighs 53 kg.

  • Rubric: News
    13.04.2012
    iPlast has commissioned a unique low-pressure molding machine with structural foaming made by UNILOY MILACRON LLC (USA)

    The new molding machine operating low-pressure molding technology with structural foaming has been mounted on iPlast production site in Nizhnekamsk. Its capacity makes 300 tons of polymeric products per month.

    What makes the machine unique is its capability to produce extra strong large-sized polymeric items weighting up to 45 kg at optimum work load of equipment. The machine has a total output capacity of 1000 kg per hour. The first production lot on the new molding machine has been output.

  • Rubric: News
    27.03.2012
    The largest injection molding machine with clamping force of 5500 ton is manufactured by Engel company for "iPlast"

    In March 2012 «iPlast» specialists have finished the acceptance of injection molding machine Engel 5500 at manufacturing plant in Austria.

    The molding machine trial run and the release of the first production lot passed successfully. And now within a month the equipment will be delivered to Nizhnekamsk.

  • Rubric: News
    08.02.2012
    iPlast has produced storage trays in a new color

    Since February 2012 iPlast company started production of storage trays Logic Store of a new standard color — red. Until now this kind of product had only one standard color — blue. The trays of other colors were manufactured only against special customers’ orders.

    Expansion of color assortment will meet the needs of customers who use the trays in their production, for organization of storage of small parts and components.

  • Rubric: News
    05.12.2011
    iPlast has elaborated a new high-capacity polymeric container

    iPlast declares it has completed engineering and has begun testing at the consumer of polymeric container with load-carrying capacity of 900 kg. The container is produced under innovative molding technology.

    Working out of the higher capacity container is a main requirement of the biggest European tire plants which utilize synthetic rubber as basic raw material.

  • Rubric: News
    17.11.2011
    "Bently Motors" have approved the polymeric containers made by iPlast

    In September 2011 iPlast signed a contract for delivery of RL-KLT 6147 polymeric containers to «Bently Motors», the world-known British automobile manufacturer of Premium cars. In October the current year a large lot of the product was shipped to the client.

    It is important to note that the batch of containers for this considerable client was produced with the «Bently Motors» logo.